ALUMINUM CERAMIC COATING


GENERAL INFORMATION
 Return to Products List


AirBorn Coating’s ALUMINUM/CERAMIC COATING was formulated to meet the needs of high temperature corrosion and oxidation protection of metallic substrates. This coating provides sacrificial corrosion protection to over 1,000 hours salt spray exposure. The coating acts as a sacrificial anode relative to the substrate, providing galvanic protection. The Aluminum/Ceramic matrix provides continuous protection up to 1,200 ° F (650 ° C) and will endure intermittent exposure to 1,500 ° F (815 ° C).

AUTOMOTIVE ACCESSORIES:
including Tubular Headers, Cast Manifolds

HEAVY TRUCK INDUSTRY EXHAUSTS

MARINE EXHAUST SYSTEMS

GAS TURBINE BLADES & CASES

SPARK ARRESTORS

TURBO CHARGERS


AirBorn inspection of coating Heavy Truck Air Inlet Ceramic Coating
Street Header Ceramic Coating Street Rod Header Ceramic Coating

Aluminum Ceramic Benefits Provide:

CORROSION RESISTANCE

RAPID COOL DOWN

REDUCES RADIANT HEAT

HIGH ABRASION RESISTANCE

HIGH LUSTER, POLISHED FINISH

IMPROVES SURFACE FINISH<

WON’T BLUE or STAIN (like Chrome)



ALUMINUM CERAMIC COATING
 Return to Products List


Coating Properties


CHEMICAL RESISTANCE:
MILD ACIDS, MILD BASES, AND ALL SOLVENTS

MECHANICAL BOND STRENGTH:
9,600 P.S.I.

OPERATING TEMPERATURE CONTINUOUS:
1,200 ° F (650 ° C)

OPERATING TEMPERATURE INTERMITTENT:
+1,500 ° F (815 ° C)



Test Result Summary


SALT SPRAY TEST ASTM B 117 (1,000 hours):
NO RED RUST

Abrasion Resistance:
(Federal Test Method: Standard number 141) Falling Sand
GREATER THAN 150 LITERS OF SAND PER mil (.001") OF COATING THICKNESS

TABER ABRASER TEST:
10 mg/1000 CYCLES

OXIDATION RESISTANCE:
(500 hours at 1,000 ° F)
NO COATING DEFECTS, Slight Discoloration

CYCLIC OXIDATION/CORROSION RESISTANCE:
6 cycles : 1,000 ° F for 16 hours then salt spray ASTM B 117 for 32 hours
NO RED RUST

THERMAL SHOCK:
1,000 ° F into ambient water
NO EFFECT


We have the flexibility to accommodate individual customers and corporate accounts, with the same commitment to on-time delivery with high quality assurance. In answer to today’s demanding market, our diverse range of coatings covers both popular and specialized applications.

Technical data sheets on our products and services provide detailed data on materials employed, specifications and performance standards.


AirBorn Coatings

  *JetCoat is a trademark of AirBorn Coatings. Not to be confused by trademarks from other coating companies like Jet-Hot™ or HPC (High Performance Coatings)™ etc….

A choice of 2 strategic AirBorn Coatings locations!
OKLAHOMA
3920 NW 39th
Oklahoma City, OK 73112
PHONE: (405) 685-4433
FAX: (405) 685-4486

E-Mail Us!
NORTH CAROLINA
905 West Charlotte Ave
Mount Holly, NC 28120
PHONE: (704) 820-9000
FAX: (704) 820-0900

E-Mail Us!
E-Mail one of our locations or call TOLL FREE 1-800-986-4646
© Copyright 1999, 2006, AirBorn Coatings, Inc.
All Logos and Trade Marks appear by permission of the Original Copyright Owner.
No part of this site may be copied or stored in an archival system without the written permission of Airborn Coatings.
 Page Last Updated/Uploaded 01/14/2006.
Back to Top